Close Menu
LED Opportunities for Converters

Multi-Layered Stacks: The Big Opportunity in Automotive LED Lighting

In these times of hyper-fast innovation, LED lighting is making a big impact in the auto industry. Beyond headlights and taillights, LED lights are making their way onto dashboards, rear view mirrors, and anywhere and everywhere auto manufacturers can find a use for them.

LED Taillight

Making those challenges a reality has been the charge of Boyd Corporation. They embraced the rapidly changing world of LED lighting a few years back, understanding that big things were coming for LEDs and the auto world.

Whatā€™s amazing about Boyd’s financial and strategic commitment in LEDs was they didnā€™t just chase a hot new product. They helped develop it themselves.

What is LED Lighting?

The term LED stands for ā€œLight Emitting Diodeā€ a two-lead semiconductor light source. LEDs create light by electroluminescence in a semiconductor material.  Electroluminescence is the phenomenon of a material emitting light when an electric current or an electric field passes through it. (Source: Edison Tech Center)

This video gives an in-depth explanation of how an LED light works.

 

Why is LED Lighting Making Such a Big Impact in the Automotive Industry?

LED lighting has grown by leaps and bounds as the technology has rapidly improved over the years. These particularly become useful to the automotive industry, and for good reason.

According to ThinkProgress, the best LED bulbs:

  • Cut electricity use by 85 percent compared to incandescent light bulbs and 40 percent compared to fluorescent (with increases on the way).
  • Can last for up to 5 years of nonstop use or a few decades if used just a few hours a day.
  • Provide superior light quality.

As Autos Cheat Sheet notes, these little diodes illuminate quickly, are virtually heat-free, last long, and are nearly indestructible. Itā€™s easy to see the enthusiasm behind LEDs for automakers, especially as their cost drops.

ā€œIn the next 2-5 years, everything on a vehicle will use LED lighting, both internal and external,ā€ said Scott Anderson of Boyd. This is what piqued the interest of Boyd, and prompted them to make a move into the supply chain via innovation and one very smart investment.

The Light Bulb Goes Off: Seeing an Opportunity

Boyd Corporation is headquartered in Pleasanton, CA. Founded in 1928, itā€™s an engineered materials and thermal management company that serves a diverse range of industries, including automotive and e-Mobility. Theyā€™re not afraid to push the envelope on innovation, and several years ago, they sensed an opportunity with LED lighting.

LEDs are now used in interior mirrors to display things like a compass or a back-up mirror. The LEDs are laminated onto the mirror, using a protective film that diffuses light and heat.

Automotive partners didn't want to laminate film on the production floor

According to Anderson, China produces roughly 90% of the LED lights. However, the application of the lights provided Boyd with an opportunity. Knowing that their automotive partners didnā€™t want to laminate the film on their production floor, they set about finding a way to do it for them.

Multi-Layered Stack = Multiple Challenges

To create a mirror with an LED light within it requires a multi-layered stack. Boyd needed to bond the LED module to the glass mirror and include the light diffusion film in between. This posed multiple challenges for the team.

ā€œWe had to seal out light, moisture, and contamination,ā€ said Boyd Engineering Manager Jeff Snedeker. ā€œThere are extremely tight tolerances. And with the small LED, there were small areas to cut out. Everything had to line up right.ā€

Mirror With LED Light

The components had to be particulate-free; no one could handle them. Boyd uses a Delta ModTech Crusader converting press to stack the adhesive diffuser with a foam component for shock absorption. Then all the materials are die cut to size and shipped to the automotive manufacturer.

Itā€™s All in the Island Placement Feature

The key is the cut that isolates the LED component. Even though a fair amount of the components are small – about the size of a quarter – itā€™s still cost-prohibitive to put down a full layer on the stack.

Both diffusion and brightness enhancing films are highly engineered. Diffusion films are made up of polycarbonate and can be from 1 mil to 10 mil-thick. The heat management films may have specific ingredients in the film to gather and disperse heat.

The key is the cut.

ā€œEverything is getting smaller and more powerful,ā€ Anderson said. “And as a result, more expensive.ā€ Boyd knew that scrap in this case would make the project cost-prohibitive, but they also knew they didnā€™t have many options with most converting machinery.

ā€œTraditional rotary converting equipment couldnā€™t make that cut,ā€ Snedeker said. ā€œYouā€™d have to cover the whole part.ā€ Boyd utilizes Delta ModTechā€™s patented Island Placement module to make and place the small die cut diffuser onto the larger layered part, thereby reducing scrap.

Take a look at this video to see Boyd’s multi-layered manufacturing techniques:

Collaborating From the Get-Go

ā€œThe end product produced today is amazing,” said Anderson. ā€œBut getting from A to B took a significant investment on Boyd’s part, and a leap of faith.ā€

First, the idea of a laminated stack didnā€™t even exist until Boyd approached its automotive partners and suggested the possibility. ā€œWe came to the table with our customer base, and shared the idea that we would make the stack here. We wanted to give them the option,ā€ Anderson said.

Collaboration is key.

The automotive companies agreed to the idea in principle, but Boyd had to execute. They teamed with Delta ModTech to investigate the multi-layered stack option. It was a true collaboration, according to Anderson.

ā€œDelta knew what their machine could do, and our expertise is in adhesive and film converting,ā€ he explained. ā€œWe talked to the customer, got the best case scenario, and then worked with Delta.ā€

Build It and They Will Come

The investment in the Delta ModTech machine was a significant one, especially since Boyd did not have full capacity to justify the purchase. They were banking on a ā€œbuild it and they will comeā€ model.  

Scott Anderson quote.

Boyd’s risk tolerance extended beyond simply dollars. They had to send their own engineers to Delta to learn the operational aspects of the machine, and to determine if the stackable product could truly be produced.

ā€œWe really started from scratch,ā€ Snedeker said. ā€œItā€™s been quite a learning curve.ā€

ā€œThe Next Ten Years Will Be Very Interesting.ā€

The innovation that Boyd has pioneered is opening eyes across many different industries. Theyā€™re prompting a shift from a paradigm where components are cut separately overseas because of cheap labor, and then assembled here in a sophisticated package.

ā€œWhen it comes to the adhesive, we are producing a highly functional, high-tolerance part,ā€ Anderson said.

Producing a highly functional, high-tolerance part.

And where will this lead? ā€œThere seems to be ample opportunity, with products like mobile phones, tablets, and laptops, as well as electric cars,ā€ said Snedeker. ā€œEverything will need circuit boards, and the question of heat dispersion and light enhancement will need to be answered over and over again.ā€

ā€œWe started with one customer committed to this process. More are coming. I think we are moving in the right direction,ā€ Anderson said.  ā€œThe next ten years will be very interesting.ā€


OVERCOME YOUR BIGGEST CONVERTING AND PACKAGING CHALLENGES

LETā€™S GET STARTED!